how to dredge a pond with front loader tractor

On the other hand, this unit will provide you with the means to renew the quality of your waterfront, and the quantity of removed sediment will be limited only by the amount of time & energy that you put in to it. Even expensive industrial dredges can’t do that.

The fire hose loosened and suspended the bottom matter OK, but the suction.

The mud is not going to come out of your discharge hose looking like toothpaste. I tried using a 3 trash pump and separate fire hose pump as a makeshift dredge. You are also going to have to be prepared to deal with the fact that you will be pumping a lot of water along with the sediment. If you are cleaning a modest area, such as around a dock or boat slip, you can expect to get the job done relatively quickly. These volumes may vary depending upon the nature of your sediment, distance pumped, and your energy & skill level, but many operators state that they are able to pump a much larger volume than our estimates. Here’s the dredging method we used: Cut a channel to allow drainage. The excavation capability of our dredger is about 60 cubic meter of water per hour, along 6 cubic meter of sediment per hour. Many farmersus includedopt to drain the filled-in pond before dredging. It excelled at that job.Our suction dredger is particularly effective in removing sand, silt, and that fluffy black stinky mud that ruins the waterfront and prevents one from enjoying beach and water activities. I used my FEL six months later to level out all the dump loads. It took ~60 loads at ~four yards a load and two days. Dredging material to settling ponds can save cost If you have access to a large area to store the spoils, this is an excellent option. We used a mini excavator and a dump trailed pulled by a tractor. The opposite side of the backhoe will often have a front loader attachment (in which case the backhoe is technically called a backhoe loader), so the seat swivels 360 degrees to allow the operator to. Last fall, I (with the help of gracious neighbors) dredged out an area (about a 100' circle, 3' deep) where silt from the stream that fills the pond had built up. A backhoe is an excavation machine comprised of a standard tractor base that supports a digging bucket on the end of a jointed two-part arm.

When the time comes to fully dredge my pond, we will drain it, dry it and use a dozer then a large excavator to fill dump trucks to move the material 1,000 feet away.

The materiel was moved to a step nearby hill and lessened the slope.Ī dozer is not the tool for digging a square hole.Ī dozer will not get the material in a truck to haul away. My dad had a one acre pond done in a one weeks time by a single guy on a big dozer. A dozer works just fine, if the excavated material is going to remain in the vicinity and you are doing a pond with somewhat sloped banks.

How to dredge a pond with front loader tractor